Keeping passengers safe and comfortable

For the highest level of passenger safety and comfort, choose our versatile Occupant Restraint Systems. Select from a wide variety of restraint options that best meet your customers' needs. All of our products are easy to install and efficient to use. Our Occupant Restraint Systems meet or surpass the requirements of the Federal Motor Vehicle Safety Standards (FMVSS) and have successfully passed the stringent 30mph/20g Impact Test criteria (when used in conjunction with an FE500 or FF600 Series Securement System). Versatility, safety and comfort - that's what you'll always have with the best in Occupant Restraint Systems.

• VARIETY
  A wide range of system options are available and may be combined to accommodate the specific needs of your passengers. This also optimizes the compatibility of the occupant restraint system installation to your particular vehicle.
• DESIGNED FOR SAFETY
  Each product is carefully engineered and thoroughly tested to ensure the greatest degree of product quality and occupant protection.
• EXTREMELY SECURE
  The Occupant Restraint Systems have anchoring hardware that is "positive-locking". This ensures that when the system is properly installed, the belt assemblies cannot be inadvertently released or disengaged.
• QUICK RLEASE
  A single, push-button function provides for the immediate release and evacuation of the occupant in the event of an emergency.
• SIMPLE TO USE
  The design of the restraint hardware and attachment fittings allow for quick and simple operation. 

Occupant Restraint Systems meet or exceed the following requirements:
30mph/20g Impact Test Criteria per SAE J2249 Standard 30mph/20g Impact Test Criteria per Canadian Z605 Standard 30mph/20g Impact Test Criteria per National Standards for School Buses 30mph/20g Impact Test Criteria per Proposed ISO 10542 Standard	49 CFR Part 38 Americans with Disabilities Act (ADA)* 49 CFR Part 571.222 (FMVSS 222) School Bus Passenger Seating and Crash Protection* FMVSS 209 Seat Belt Standard FMVSS 302 Flammability Test
Floor Track or Plates shall be selected and installed per FE500 Series Requirements. *For ADA or FMVS 222 Regulations only, Floor Track or Plates shall be selected and installed per FE500 or FF800 Requirements. Copies of impact test data and certificates of conformance available upon request.